AKM Spotless Water System for car wash,Pre-Filled with DI 5L Resin, with Bypass, DI Water System,Garden Hose Quick Connector, Deionized Water System for RV, Vehicles, Bikes, Boats, No Spots

Why it's a great deal

• Spotless Car Wash: Usually after washing the car, you may notice spots on your vehicle. These spots are caused by the precipitation of mineral ions in the water. The AKM Deionized Water Car Wash System is designed to remove mineral ions from water, producing pure, deionized water. By washing your vehicle with deionized water, you can achieve a spotless finish without the need for manual drying.

• AKM portable deionized water system include 7.3”*15” FRP Tank (with polyester cover), 5 liters of mixed bed resin pre-filled, 3/4" garden hose quick connector *2,3/4" double female connecton*1, PTFE sealing tape *1, black handle*1, TDS Meter Pen *1 for testing water's ppm value.

• Bypass Function for Easy Switching: The included valve features a built-in bypass function. No complicated steps—just shift the handle to switch between bypass and filtration modes. Use the bypass mode during most of the car wash, then switch to filtration for the final rinse to conserve pure water and extend the resin’s lifespan.

• Our system is not a single-use product. When the resin inside the tank is exhausted, you can simply refill it using AKM mixed di resin. Just pour out the used resin, refill the tank, and reconnect the system—it's ready to use again. Unlike standard plastic filter housings, our durable tank is built for long-term use, so typically only the resin needs to be replaced.

• How to Use: Our car wash system comes pre-filled with 5 liters of mixed bed resin. Simply connect it to your garden hose, and it's ready to use. The system is reusable—just replace the mixed bed resin when needed. The included TDS meter allows you to test water ppm value at any time.